Easihold glue is a type of resin which is used to fix loose stones, gravel or aggregate surfaces. It is promoted as a simple way of creating safe, non-dusty and long-lasting tracks or roads that do not require classic concrete or other binding materials. If you are thinking of using Easihold, then information about how it works and how well it can perform in different conditions will be useful in order to decide.
What is Easihold
Easihold glue is a new and unique product of its kind, which is an award-winning stone binder; made in the UK. Easihold is an environmentally friendly water-based gel that seals stones in position with a finished look that still allows for water penetration. It can be applied to keep stones in place in a flower bed or to fix the path with stepping stones or to any other area where stray small stones are an annoyance in the garden design.
What is Easihold used for?
Easihold glue and is aggregates an in resin landscaping. Binder regions It which and enables is the driveways mainly construction and used of it in a provides order strong the to surface fix look for loose as pathways, stones, if patios, gravel it decorative is natural. It is usually used in order to control the movement of the stones, as well as to minimize the need for maintenance.
How long does Easihold last?
Easihold glue can last for three years or even longer under normal conditions. Its longevity depends on various factors, such as exposure to weather, the types of stones used, and the amount of foot traffic in the area. With regular maintenance and proper application techniques, its durability can be further enhanced.
Does Easihold let water through?
Easihold glue is a permeable binder, meaning it permits water to flow through. This characteristic makes it ideal for locations that require effective drainage, helping to minimize problems such as surface pooling or flooding.
Is Easihold safe for plants?
Easihold glue is considered safe for plants. It is a water-based, non-toxic binder that does not emit harmful chemicals into the environment. This makes it a good choice for garden pathways or areas close to plants and vegetation.
How to use easihold
Easihold is a water-based resin binder that is often used to stabilize loose stones, gravel, or aggregates in landscaping projects. It forms a durable, low-maintenance surface while maintaining the natural look of the materials. Here’s a step-by-step guide on how to use Easihold effectively:
Preparation
- Choose Your Stones or Gravel: Make sure the stones are clean, dry, and the right size and type. Easihold is most effective with decorative aggregates like pea gravel or other small stones.
- Prepare the Area: Remove any debris, weeds, and loose dirt from the application site. It’s important to have a stable base layer, such as compacted soil or a sub-base, to prevent sinking or shifting.
- Dry Conditions: Confirm that both the stones and the area are completely dry before applying Easihold, as moisture can impact adhesion.
Mixing and Setup
- Shake the Bottle: Make sure to shake the Easihold container well to ensure the resin is mixed evenly.
- Dilution (Optional): If the manufacturer recommends it, you can dilute Easihold with water to reach the desired consistency, particularly for lighter applications.
Drying and Curing
- Allow to Dry: Easihold usually needs about 24–72 hours to dry and cure, depending on the weather conditions such as temperature and humidity.
- Protect from rain: Make sure to cover the area or keep it sheltered from rain during the curing period to avoid any resin being washed away.
Maintenance
- Regular Cleaning: Sweep or rinse the surface to keep it free from dirt and debris.
- Reapply as Needed: Over time, reapply Easihold to refresh and maintain the binding.
Application Methods
Easihold can be applied in two main ways:
Pour-On Method
- Spread the Stones: Evenly distribute the stones or gravel over the prepared surface.
- Pour the Resin: Gradually pour Easihold directly onto the stones, letting it soak in and bind the materials together.
- Spread Evenly: Utilize a brush or squeegee to ensure the resin is evenly spread across the surface.
- Apply Multiple Coats: To enhance durability, add more layers once the first coat has dried.
Pre-Mix Method
- Mix with Stones: Start by placing the stones in a large container or wheelbarrow. Slowly add Easihold while mixing to ensure the stones are evenly coated.
- Spread the Mixture: Next, pour the coated stones onto the prepared surface and spread them out evenly.
- Compact the Stones: Finally, gently press the stones into position using a tamper or roller to achieve a smooth finish.